| Ravindra Nath Yadav, Vinod Yadava and K.B. Judal, (2011), “Machining of Metal Matrix Composites (MMCs) using Simultaneous Influence of Abrasion and Spark Erosion: A combined Approach”, Proceedings of the 7th International conference on Precision, Meso, Micro and Nano Engineering (COPEN-7), College of Engineering, Pune, India, December, 10-11, pp. 353-358. |
| Ravindra Nath Yadav, Vinod Yadava and G. K. Singh, (2012), “Intelligent Modeling of Electro-Discharge Diamond Face Grinding (EDDFG)”, Proceedings of the International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2012), Punjab Technical University, Kapurthala, India, October, 5-7, pp. 399-403. |
| Ravindra Nath Yadav, Vinod Yadava and G. K. Singh (2012), “Modeling of Spark Assisted Diamond Face Grinding of Tungsten Carbide- Cobalt (WC-Co) Composite”, Proceedings of the 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012) Conference, Jadavpur University, Kolkata, India, December 14-16, Vol. 1, pp. 379-383. |
| Ravindra Nath Yadav and Vinod Yadava, (2012), “A New Way of Abrasive Hybrid Machining using Slotted Wheel”, Proceedings of the 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012) Conference, Jadavpur University, Kolkata, India, December 14-16, Vol. 1, pp.369-373. |
| Ravindra Nath Yadav and Vinod Yadava, (2012), “Recent Trends on Hybrid Electrical Discharge Machining: An Overview”, Proceedings of the International Conference on Agile Manufacturing System (ICAM-2012), Indian Institute of Technology, BHU, Varanasi, India, December 16-19, pp. 386-390. |
| Ravindra Nath Yadav and Vinod Yadava, (2012), “Performance Evaluation of Erosion and Abrasion Based Compound Wheel during Machining of Metal Matrix Composite”, Proceedings of the International Conference on Agile Manufacturing System (ICAM-2012), Indian Institute of Technology, BHU, Varanasi, India, December 16-19, pp. 502-505. |
| Ravindra Nath Yadav and Vinod Yadava, (2012), “Review on Electrical Discharge Diamond Grinding: A Hybrid Machining Process”, Proceedings of the 3rd National Conference on Advances in Manufacturing Technology, Technical Teachers Training and Research, Chandigarh, March, 15-16, pp. 322-330. |
| Ravindra Nath Yadav, Vinod Yadava and Sanjeev Kumar Singh Yadav, (2012), “Production and Processing of Metal Matrix Composites (MMCs): Challenges and Opportunities”, Proceedings of the All India Seminar on Advanced in Materials and Material Selection in Design (AMMSD-2012), Harcourt Butler Technological Institute, Kanpur, August, 24-25, pp. 122-132. |
| Ravindra Nath Yadav and Vinod Yadava, (2012), “Electrical Discharge Grinding (EDG): A Review”, Proceedings of the National Conference on Trends and Advances in Mechanical Engineering, (TAME 2012), YMCA University of Science and Technology, Faridabad, October 19-20, pp. 590-597. |
| Ravindra Nath Yadav and Vinod Yadava, (2013), “Preliminary Study on Slotted-Electrical Discharge Diamond Face Grinding of Metal Matrix Composite”, Proceedings of the 2nd International Conference on Advancements and Future Trends in Mechanical and Materials Engineering (AFTMME-2013), Punjab Technical University, Chandigarh, India, October, 3-6, pp. 397-401. |
| Ravindra Nath Yadav and Vinod Yadava, (2013), “Modeling of Slotted-Electrical Discharge Diamond Face Grinding using Artificial Neural Network”, Proceedings of the International Conference on Smart Technologies for Mechanical Engineering (STME-2013), Delhi Technological University, Delhi, India, October, 25-26, pp. 669-674. |
| Monika Saini, Ravindra Nath Yadav and Sunil Kumar, (2015), “An Overview on Turning Process”, Proceedings of the 1st International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2015), ITS Engineering College Greater Noida, India, April 10-11, Vol. 1, pp. 377-386. |
| Ravindra Nath Yadav, (2016), “Recent Research Trends in Tool Electrode of Electrical Discharge Machining: A Review”, Proceedings of the 2nd International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2016), ITS Engineering College Greater Noida, India, April 15-16, pp. 178-182 |
| Ravindra Nath Yadav, (2016), “Optimize the Parameters of Dual Turning Process using Taguchi Methodology”, Proceedings of the 2nd International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2016), ITS Engineering College Greater Noida, India, April 15-16, pp. 159-163. |
| Ravindra Nath Yadav, (2016), “Application of Artificial Intelligent in Metal Cutting”, Proceedings of the International Conference on Advanced Computational Techniques Information and Communication Technology (ICACITCT-2016), Kamala Nehru Institute of Technology Sultanpur, India, September 23-24, pp. 18-88. |
| S. Kumar, Ravindra Nath Yadav and R. Kumar, (2016), “Statistical Techniques used in Turning Process: A Review”, Proceedings of the IVth International Conference on Production and Industrial Engineering (CPIE-2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, December 19-21, Vol. 1, No. 151, pp. 1-10. |
| S. Kumar, Ravindra Nath Yadav and R. Kumar, (2016), “Multi-Objective Optimiztion of Duplex Turning of Titanium Alloy (TI-6AL-4V)”, Proceedings of the IVth International Conference on Production and Industrial Engineering (CPIE-2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, December 19-21, Vol. 1, No. 162, pp. 1-10. |
| Ravindra Nath Yadav, (2016), “Turning based Hybrid Machining Processes: A Review”, Proceedings of the IVth International Conference on Production and Industrial Engineering (CPIE-2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, December 19-21, Vol. 1, No. 309, pp. 1-10. |
| Ravindra Nath Yadav, (2016), “A Comparative Study of Uniform and Interrupted Wheels in Electrical Discharge Grinding”, Proceedings of the IVth International Conference on Production and Industrial Engineering (CPIE-2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, December 19-21, Vol. 1, No. 240, pp 1-9. |
| S. Kumar, Ravindra Nath Yadav and R. Kumar, (2017), “Experimental Studies on Duplex Turning Process of Titanium Alloy (Ti-6Al-4V)”, Proceedings of the International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS-2017), Motilal Nehru National Institute of Technology Allahabad, India, January 3-5, pp. 386-390. |
| S. Kumar, Ravindra Nath Yadav and R. Kumar, (2017), “Multi-Objectives Optimization of Duplex Turning of Inconel-718 using Taguchi Methodology”, Proceedings of the International Conference on Design, Materials and Manufacturing Concerns in Production of Quality Engineering Goods, Harcourt Butler Technical University, Kanpur, India, March 27-29, 2017, pp. 270-275. |
| Ravindra Nath Yadav, (2017), “Development of FEM based Thermal Modeling for Material Removal during Electrical Discharge Machining of Inconel 718”, Proceedings of the International Conference on Design, Materials and Manufacturing Concerns in Production of Quality Engineering Goods, Harcourt Butler Technical University, Kanpur, India, March 27-29, 2017, pp. 248-255. |
| Ravindra Nath Yadav, S. Mishra and M. Yadav (2017), “A State of Art on Turning of Metal Matrix Composites”, Proceedings of the 3rd International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2017), ITS Engineering College Greater Noida, India, April 21-22, 2017, pp. 306-311. |
| Naveen Gaurav and Ravindra Nath Yadav, (2018), “Experimental Investigation on Micro-Wire EDM of Inconel-718”, Proceedings of the National Seminar on Advances in Materials, manufacturing and Renewable Energy Systems (AMMRES 2018), BBD National Institute of Technology and Management, Lucknow, August 17-18, 2018, pp. 317-328. |
| S. Kumar, Ravindra Nath Yadav and R. Kumar, (2018), “An Overview on Machinability of Titanium Alloys”, Proceedings of the National Seminar on Advances in Materials, manufacturing and Renewable Energy Systems (AMMRES 2018), BBD National Institute of Technology and Management, Lucknow, August 17-18, pp. 219-230. |
| Hrishikesh and Ravindra Nath Yadav, (2018), “Experimental Analysis of Performance Parameters during Chemically Aided Turning of AISI 1020 Steel”, Proceedings of the National Seminar on Advances in Materials, manufacturing and Renewable Energy Systems (AMMRES 2018), BBD National Institute of Technology and Management, Lucknow, August 17-18, pp. 105-118. |
| A. K. Singh, Vinod Yadava and Ravindra Nath Yadav (2019), “Futuristic Research Trends in Spark Assisted Abrasive Grinding, National Conference on Futuristics in Mechanical Engineering (FME-2019), Madan Mohan Malviya University of Technology Gorakhpur, March 28-29, 2019 pp, 118- 122. |
| BOOK CHAPTERS |
| Ravindra Nath Yadav and A. Suryavanshi, (2019), “Micro Electrochemical Discharge Machining”, in Micro Electrical Discharge Machining Processes-Technologies and Applications, ed. by G. Kibria, M.P. Jahan and B. Bhattacharyya , Springer Nature, Singapore, pp. 265-291, doi.org/10.1007/978-981-13-3074-2 |
| Ravindra Nath Yadav, S. Mishra and S.K.S. Yadav, (2021), “Electro Spark Process for Microfabrication”, in Electro Microfabrication, ed. by T. Saleh, K. Takahata, M., Sultan and M. Ali, Elsevier, Netherlands, pp. 1-31, doi.org/10.1016/B978-0-12-820049-0.00004-9. |
| Ravindra Nath Yadav, (2022), “Solid State Friction Welding Technology for Joining of Lightweight Metal and Alloys”, in Advances in Processing of Lightweight Metal Alloys and Composites, ed. by R. Vaira Vignesh, R. Padmanaban, M. Govindaraju, Springer Nature, Singapore, pp.147-165, doi.org/10.1007/978-981-19-7146-4_8 |
| Ravindra Nath Yadav, (2023), “Laser Assisted Hybrid Micromachining Processes and its Applications”, in Hybrid Micromachining and Microfabriccation Technologies: Principle, Varieties and Applications, ed. by S. Kunar, G. Kibria, P. Chatterjee, A. Perveen, John Wiley and Sons, USA, pp. 151-178, doi.org/10.1002/9781394174959. |
| Ravindra Nath Yadav, S. Mishra and A. Suryavanshi, (2024), “Laser Beam Micromachining and Fabrication”, Electro Micromachining and Microfabrication: Principles and Research Advances, ed. by S. Kunar, G. Kibria, P. Chatterjee, Apple Academic Press, USA, pp. 139-171., doi.org/10.1201/9781003397793. |
| Ravindra Nath Yadav, B.K. Bhuyan, SKS Yadav and S. Mishra, (2025) “Laser–Arc Hybrid Welding”, in Advanced Welding Technologies, ed. by S. Kunar and G. Mandal, Scrivener Willey, pp. 401-418, doi.org/10.1002/9781394331925.ch20 |
